USB Extenders extend the USB cable length to maximum 10000 m Bad Breisig 01.06.2012: Although many OEMs loyal to the old GPIB or RS232 interfaces and equip your instruments so that, yet more and more measuring and test systems are offered with additional USB interfaces. The user can benefit from the USB ports present by default on every PC and laptop for certain tasks and need to buy any additional interface cards to communicate with their instruments. Depending on the application, the default USB range of 5 m may be insufficient. In these cases, the ICRON USB Extender from Amplicon offer a professional solution in speed, bus transparency and maximum range, which is very impressive with maximum of 10 km. Ranger 1850 the new Ranger 1850 is the affordable entry level up to 85 m, if only a USB1. 1 port is required. The Ranger 1850 is a USB1.
1-port available and reached at 12Mbps at a distance of 40m and 1.5Mbps a maximum distance of 85m. The Ranger 1850 does not need special drivers or an additional power supply. The local - and remote module is simply connected it with a standard Cat5 cable and already can start communicating with USB devices. Due to the special technology of Icron, the Ranger 1850 behaves absolutely transparent in the USB power. The Ranger 1850 has successfully passed extensive tests with all major operating systems (Windows, MacOS, Linux), interactive white boards and peripheral devices, and can be used due to its rugged EMC design for industrial applications. Ranger-2211/2212 special is the fact that the power supply unit not an Extender module coupled to the new Ranger-2211, i.e.
depending on what situation is favourable, the power supply both the local and the remote module can be plugged. Standard Cat5 cable, then automatically both extender modules supplied with the necessary operating current of 500mA, to even at a maximum distance of 100 m that standards-compliant Power supply to ensure. The Ranger-2211 is a USB2. 0 port available and reached maximum 480Mbps supports all USB2. 0 devices, as well as all of USB1. 1 devices in the low - and full-speed mode. Also, the Ranger-2211 has successfully passed extensive testing with all major operating systems (Windows, MacOS, Linux), interactive white boards and peripheral devices and can be used due to its rugged EMC design for industrial applications. The model Ranger-2212 is the 2-port version, with the same features of the single-port version. Only exception is the fact that the power supply necessarily must be inserted in the local ex-Extender module. The power supply of the remote ex Extender module again via the standard CAT5 cables and guaranteed standard 500mA at two USB2. 0 ports. Ranger-2244 of the Ranger 2244 is the flagship of the Icron Extender family and reached via a singlemode"fiber-optic connection a maximum range of impressive 10 km. The Ranger 2244 is based on the LionsGate extension ASIC and the ExtremeUSB technology icron and requires no special drivers for the tested operating systems Windows, MacOS and Linux. It provides 4 x USB2. 0 and USB1.1. 1 ports available and guaranteed the standard power of 500mA on all 4 ports. USB2. 0 devices are supported with maximum 480Mbps and all of USB1. 1 devices both low-speed and full-speed mode. Up to 14 USB devices can be managed via USB hubs.
1-port available and reached at 12Mbps at a distance of 40m and 1.5Mbps a maximum distance of 85m. The Ranger 1850 does not need special drivers or an additional power supply. The local - and remote module is simply connected it with a standard Cat5 cable and already can start communicating with USB devices. Due to the special technology of Icron, the Ranger 1850 behaves absolutely transparent in the USB power. The Ranger 1850 has successfully passed extensive tests with all major operating systems (Windows, MacOS, Linux), interactive white boards and peripheral devices, and can be used due to its rugged EMC design for industrial applications. Ranger-2211/2212 special is the fact that the power supply unit not an Extender module coupled to the new Ranger-2211, i.e.
depending on what situation is favourable, the power supply both the local and the remote module can be plugged. Standard Cat5 cable, then automatically both extender modules supplied with the necessary operating current of 500mA, to even at a maximum distance of 100 m that standards-compliant Power supply to ensure. The Ranger-2211 is a USB2. 0 port available and reached maximum 480Mbps supports all USB2. 0 devices, as well as all of USB1. 1 devices in the low - and full-speed mode. Also, the Ranger-2211 has successfully passed extensive testing with all major operating systems (Windows, MacOS, Linux), interactive white boards and peripheral devices and can be used due to its rugged EMC design for industrial applications. The model Ranger-2212 is the 2-port version, with the same features of the single-port version. Only exception is the fact that the power supply necessarily must be inserted in the local ex-Extender module. The power supply of the remote ex Extender module again via the standard CAT5 cables and guaranteed standard 500mA at two USB2. 0 ports. Ranger-2244 of the Ranger 2244 is the flagship of the Icron Extender family and reached via a singlemode"fiber-optic connection a maximum range of impressive 10 km. The Ranger 2244 is based on the LionsGate extension ASIC and the ExtremeUSB technology icron and requires no special drivers for the tested operating systems Windows, MacOS and Linux. It provides 4 x USB2. 0 and USB1.1. 1 ports available and guaranteed the standard power of 500mA on all 4 ports. USB2. 0 devices are supported with maximum 480Mbps and all of USB1. 1 devices both low-speed and full-speed mode. Up to 14 USB devices can be managed via USB hubs.
Posted by: |